How to adjust the mirror in the warehouse
Reversing into a parking garage is one of the difficult points in the driving test, and correctly adjusting the rearview mirror is a key step to ensure successful parking. This article will introduce in detail how to adjust the mirror of the reverse database, and provide you with a structured data reference based on the hot topics and hot content of the entire network in the past 10 days.
1. Basic steps for adjusting the inverted storage mirror
1.Left rearview mirror adjustment: The car body occupies 1/4 of the mirror surface, and the horizon line is in the center of the mirror surface.
2.Right rearview mirror adjustment: The car body also occupies 1/4 of the mirror surface, but the horizon line can be slightly higher than the center to facilitate observation of the ground markings.
3.Center rearview mirror adjustment: Make sure you have a full view of the rear window and the horizon is in the center of the mirror.
| Mirror type | Body proportion | Horizon position |
|---|---|---|
| left rearview mirror | 1/4 | central |
| right rearview mirror | 1/4 | slightly above the center |
| center rearview mirror | Not applicable | central |
2. The correlation between the hot topics on the entire network in the past 10 days and the dumping techniques
1.Autonomous driving technology: The recent Tesla FSD update has caused heated discussions, but manual warehouse dumping is still a necessary skill for the exam.
2.New driving test regulations: Electronic proctoring is implemented in many places, and the fault tolerance rate for backlog is lower, making mirror adjustment even more important.
3.Heated car rearview mirror: With the rainy season coming, keeping the mirror surface clear is the prerequisite for successful warehouse dumping.
| hot topics | Key points of associated dumping | heat index |
|---|---|---|
| Autonomous driving technology | Manual dump comparison | ★★★★☆ |
| New driving test regulations | Changes in exam standards | ★★★☆☆ |
| Heated rearview mirror | Clear vision guaranteed | ★★☆☆☆ |
3. Common errors and solutions
1.Mirror angle is too low: As a result, the corner of the library cannot be seen, the right rearview mirror should be raised appropriately.
2.Over-reliance on reversing images: The test vehicle may not have this configuration, so you need to get used to observing the rearview mirror.
3.Effect of seat position: It is necessary to fix the driving posture before adjusting the mirror.
| Error type | Specific performance | solution |
|---|---|---|
| Angle too low | Can't see ground markings | Raise the mirror 10-15 degrees |
| Dependence on electronic devices | Ignore looking in the rearview mirror | Turn off accessibility exercises |
| Seat is not fixed | The perspective is inconsistent every time | Adjust the seat first, then adjust the mirror |
4. Adjustment skills under special weather
1.rainy day: Turn on the rearview mirror heating function, or apply waterproofing agent in advance.
2.Strong light environment: Use the anti-glare function to avoid direct sunlight affecting judgment.
3.night: Appropriately lower the mirror angle to make it easier to observe the reflective markings on the ground.
5. Practice suggestions
1. Check the status of the three mirrors every time before getting in the car to form muscle memory.
2. Practice under different lighting conditions and adapt to various environments.
3. You can purchase a small round mirror to assist in observing the rear wheel position, but it needs to be removed during the exam.
Through the above structured data and detailed instructions, I believe you can master the correct adjustment method of the inverted library mirror. Remember, a good start is half the battle, and precise mirror adjustment can make the job easier with less effort!
check the details
check the details
en
